Damp in old houses: what to ask first
Damp in an old house is common, often misdiagnosed and sometimes sold a cure it does not need. A few questions up front save money and stop the problem coming back.
Find the cause, not just the symptom
Damp patches, peeling paint and a musty smell can come from several different causes. A leaking gutter, a blocked gully, a failed pipe, condensation or genuinely rising ground moisture all look similar on the wall. The first question to ask anyone offering treatment is what they believe is causing it, and what they checked to be sure. A moisture meter reading on its own proves very little, because salts in old plaster can make a meter read high.
The three main types
Penetrating damp comes through the wall from outside, usually because of defective guttering, pointing, render or flashings. Condensation forms when warm, moist air meets cold surfaces, and is common in rooms with poor ventilation. Rising damp is moisture drawn up from the ground and tends to leave a fairly even tide-mark low on the wall. In practice, penetrating damp and condensation are much more common than rising damp, so fix the simple outside causes first.
Look outside before looking inside
Check the gutters and downpipes for leaks, look for ground levels piled up against the wall, and see whether a path or patio has been laid higher than it should be. Old solid brick walls need to breathe and dry out, and anything that traps moisture, such as hard cement render or a patch of impermeable paint, can make matters worse. Fixing these things is usually cheaper than any chemical treatment.
Questions to ask a damp contractor
Ask what they found, how they found it, and what else it could be. Ask whether the work is a repair or a treatment, and what happens to the old plaster. Ask what the written guarantee covers and who stands behind it, and read it. If the report only offers one answer, and that answer is the most expensive one, get a second opinion from someone who does not sell the treatment.
Plaster and finishes matter
In an older house the replacement plaster matters as much as the injection or repair. Salt-contaminated plaster needs to be removed, and a breathable lime-based or specialist plaster tends to suit solid walls better than a modern gypsum or cement mix. Ask what is going back on the wall, because that is what decides whether the damp stays away or shows through the new paint within a year.
Ventilation and living habits
Even after the building is sorted, a house that is kept warm, sealed and full of drying washing will produce condensation. Extractor fans in the kitchen and bathroom, trickle vents or opening windows briefly each day, and keeping furniture slightly off cold external walls all help. Near the sea, salt in the air and driving rain add to the load on external walls, so regular maintenance of pointing and paint is part of the cure.
What a fair report looks like
A useful damp report names the likely cause for each affected area, says how that was worked out, and lists the repairs in order of priority. It should be written so that another builder could price the work. Be wary of reports that mention only treatment, make no mention of gutters or ground levels, or carry pressure about a limited-time discount. A reasonable adviser is happy for you to take time to think and to compare.
Related
Our guide to building near the sea: salt, damp and materials goes further on coastal conditions, and the house renovations page shows how we handle strip-out and repairs. If you are in the old town, see Ramsgate Harbour and East Cliff.
Free site visit and quote
Tell us about the project at hello@ramsgatebuilders.co.uk or on WhatsApp. We'll arrange a site visit to give you a proper quote.